Simulasi Antrian Kantor Pos M/M/3 dengan MATLAB

Authors

  • Sari Indah Anatta Setiawan SofTech

DOI:

https://doi.org/10.31937/ti.v4i2.316

Abstract

Pemodelan dan simulasi banyak dijumpai dalam berbagai bidang kehidupan, terutama untuk mengetahui dampak perubahan yang terjadi pada suatu sistem jika perubahan dilakukan, atau untuk suatu sistem yang benar-benar baru atau sulit untuk dimodelkan. Salah satu simulasi yang banyak dilakukan adalah simulasi antrian. Pada tulisan ini, penulis mencoba untuk melakukan simulasi antrian M/M/3 di sebuah kantor pos dengan memanfaatkan library simevents yang telah disediakan oleh perangkat lunak MATLAB. Langkah-langkah pengerjaan hingga analisis akan disampaikan dalam tulisan ini, sehingga diharapkan dapat memberikan gambaran yang sesuai mengenai cara simulasi dengan menggunakan MATLAB.

Kata kunci”pemodelan, simulasi, antrian, M/M/3, MATLAB

Downloads

Download data is not yet available.

Downloads

Published

2012-12-01

How to Cite

Setiawan, S. I. A. (2012). Simulasi Antrian Kantor Pos M/M/3 dengan MATLAB. Ultimatics : Jurnal Teknik Informatika, 4(2), 22–27. https://doi.org/10.31937/ti.v4i2.316

Issue

Vol. 4 No. 2 (2012): Ultimatics: Jurnal Ilmu Teknik Informatika

Section

Articles

License

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike International License (CC-BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Copyright without Restrictions

The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.

The submitted papers are assumed to contain no proprietary material unprotected by patent or patent application; responsibility for technical content and for protection of proprietary material rests solely with the author(s) and their organizations and is not the responsibility of the ULTIMATICS or its Editorial Staff. The main (first/corresponding) author is responsible for ensuring that the article has been seen and approved by all the other authors. It is the responsibility of the author to obtain all necessary copyright release permissions for the use of any copyrighted materials in the manuscript prior to the submission.