Submissions Guideline

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  • Where available, URLs for the references have been provided.
  • The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points.
  • The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  • If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Author Guidelines

All submissions will be processed electronically to Editorial Office through the online system. The author has to register in the OJS as the Author and log in to the OJS by accessing the following address: https://ejournals.umn.ac.id/index.php/index/login. If authors are experiencing problems with the online submission, they can contact Editorial Office at email:  [email protected]

  1. Manuscript criteria

    1. Scientific Coverage: Disciplines related to architecture, urbanism, and multimedia technology in the construction industry towards sustainable environments.

    2. Visionary Aspiration: Providing studies with international perspectives.

    3. Scientific Pioneering: Publishing articles containing original works that bring novelty and contribute to scientific advancement.

    4. Architectural Development: Providing real value and contributions to the advancement of the architectural discipline.

    5. Scientific Impact: Providing a high scientific impact on the wider community, especially academicians, practitioners, and industry professionals.

    6. Plagiarism: The level of plagiarism is allowed up to a maximum of 20%.

    7. Ratio of Primary References to Other Sources: The ratio of primary references to other sources is >80%.

    8. Novelty: The percentage of novely is >80%.

    9. Analysis and Synthesis: The level of analysis and synthesis is good. For example, carefully and effectively collaborating regulations with cases.

    10. Conclusion: The conclusion is good, meaning it is made in accordance with the researched problem and uses concise and clear language.

  2. Manuscript format

    1. The article typed in Microsoft Word version 2007 or later.

    2. The article typed with 1 line spacing on A4 paper size (21 cm x 29,7 cm), the top-left margin is 3 cm and the bottom-right margin is 2 cm and using Times New Roman’s font type.

    3. The article should be prepared according to the following author guidelines in this template. The article should contain of minimum 3500 words.

    4. References contain a minimum of 15 references (primary references) from reputable journals/conferences.

  3. Writing Style

    The journal writing style is established to meet the standards as outlined in the Author Guidelines, which can be generally explained as follows:

    • Writing Format

      The writing format, including paper size, header and footer limits, font type and size, and other formatting details, follows the guidelines provided by the journal manager on the OJS platform.

    • Article Titles

      Article titles should be clear and informative.

    • Author Names and Affiliations

      Author names and affiliations are complete and consistent, including name, affiliation, institution address, and email address.

    • Language

      Articles are written entirely in academic English.

    • Abstract

      The abstract is written clearly and concisely, consisting of 150-250 words in English.

    • Keywords

      Keywords reflect important concepts in the article and consist of a maximum of 5 (five) words.

    • Chapters and Subchapters

      The chapters and subchapters should be complete and systematic, starting from Introduction, Method, Results and Discussion, Conclusion, and References.

    • Supporting Instruments

      The use of figures/charts/diagrams should be accompanied by clear captions as the supporting instrument.

    • Citation and Reference

      Citation and reference are standardized and consistent, following the IEEE style standards and created using the referencing tool Mendeley.

    • Compilation of Reference Lists

      The compilation of the reference list is standardized and consistent, following the IEEE style standards.

  4. Reviewing of Manuscripts

    Every submitted paper is independently and blindly reviewed by at least two peer-reviewers. The decision for publication, amendment, or rejection is based upon their reports/recommendations. If two or more reviewers consider a manuscript unsuitable for publication in this journal, a statement explaining the basis for the decision will be sent to the authors within six months of the submission date.

  5. Revision of Manuscripts

    Manuscripts sent back to the authors for revision should be returned to the editor without delay (maximum of two weeks). Revised manuscripts can be sent to the editorial office through the same online system. Revised manuscripts returned later than one month will be considered as new submissions.

  6. Editing References

    • Periodicals

      J.K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x, pp. xxx-xxx, Sept. 2013.

    • Book

      J.K. Author, “Title of chapter in the book,” in Title of His Published Book, xth ed. City of Publisher, Country or Nation: Abbrev. Of Publisher, year, ch. x, sec. x, pp xxx-xxx.

    • Report

      J.K. Author, “Title of report,” Abbrev. Name of Co., City of Co., Abbrev. State, Rep. xxx, year.

    • Handbook

      Name of Manual/ Handbook, x ed., Abbrev. Name of Co., City of Co., Abbrev. State, year, pp. xxx-xxx.

    • Published Conference Proceedings

      J.K. Author, “Title of paper,” in Unabbreviated Name of Conf., City of Conf., Abbrev. State (if given), year, pp. xxx-xxx.

    • Papers Presented at Conferences

      J.K. Author, “Title of paper,” presented at the Unabbrev. Name of Conf., City of Conf., Abbrev. State, year.

    • Patents

      J.K. Author, “Title of patent,” US. Patent xxxxxxx, Abbrev. 01 January 2014.

    • Theses and Dissertations

      J.K. Author, “Title of thesis,” M.Sc. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year. J.K. Author, “Title of dissertation,” Ph.D. dissertation, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.

    • Unpublished

      J.K. Author, “Title of paper,” unpublished. J.K. Author, “Title of paper,” Abbrev. Title of Journal, in press.

    • Online Sources

      J.K. Author. (year, month day). Title (edition) [Type of medium]. Available: http:// www.(URL) J.K. Author. (year, month). Title. Journal [Type of medium]. volume(issue), pp. if given. Available: http://www.(URL) Note: type of medium could be online media, CD-ROM, USB, etc.

 

Copyright Notice

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike International License (CC-BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Copyright without Restrictions

The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.

The submitted papers are assumed to contain no proprietary material unprotected by patent or patent application; responsibility for technical content and for protection of proprietary material rests solely with the author(s) and their organizations and is not the responsibility of the HATÊUP or its Editorial Staff. The main (first/corresponding) author is responsible for ensuring that the article has been seen and approved by all the other authors. It is the responsibility of the author to obtain all necessary copyright release permissions for the use of any copyrighted materials in the manuscript prior to the submission.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.